There are several things which owners of jumper cables can do with. Here we are going to review how welder can make use of two car batteries to work on his vehicle. There are different types of welding and one of the common weldings is welding any damaged part of the vehicle. Many car users and car owners to go with repair tools to affect some minor repairs in any part of the vehicle they are using especially the broken part of the vehicle. A good example of tools which many uses is the jumper cables. If your question is what are the best jumper cables? Just do a internet research you will find the answer. Almost any other tool that is required to repair a vehicle can be carried about but the exceptions to that among others are the welder. It is always not common to carry the welder about but for it to be powered it requires a power source which most of the times the type of welding job is above the capability of the scope and power of the portable generators. Science and technology have made things easier these days for the traditional welder who now makes use of other sources of power to do welding work on the vehicle. They can now make use of two batteries as the alternative source of power.
Here are simple procedures which anybody can employ to conduct welding work on the vehicle making use of the jumper cables and two car batteries. Here are the requirements and they include 12-volt batteries two of them are needed. The other requirements include 2 jumper cables, locking pliers, dark glasses, welding rod, carburetor cleaner or brake cleaner and a clean rag.
To start, the two batteries have to be wired and they have to be positioned next to each other. The connection has to be carefully done so that there will not be a mistake that could cause damage. The connection has to be done in such a way that it passes from the negative terminal of the battery to the positive terminal of the two batteries. The combination of the two batteries would mean 24 volts battery. Now the remaining terminal of the battery has to be hooked to the part of the vehicle or anything that is to be welded. The jumper cables would be used to complete the connection from the terminal of the battery that is the negative terminal to the locking pliers. The welding would be done properly by clamping the welding rod to the jaws of the pliers. However, before you start the welding it is necessary that you clean the part of the vehicle or any material to be welded. It is also necessary to remove every scrap or dirt or anything that may obstruct the smooth welding of the portion to be welded.
Before you begin the welding work it is necessary that you put the dark glass to ensure the protection of your eyes from the harmful effect of the power source. This way one can see one of the good uses of jumper cables in fixing vehicles. This is one of the other uses the jumper cable can be put into. There are several other uses which are too numerous to mention here.