A large part of the value of any old or historic home is the presence of original details like windows. Most buyers of these types of homes appreciate and expect to find these original details and will pay a premium for homes without replacements. And to find GoodWindowWorks the house with restored original windows along with other original elements is a rare gem that commands a much higher selling price.
The more complicated something is the more likely it is to break. And windows are no exception to this rule. Historic windows operate on a simple rope and pulley counterweight system. Sash cords are fit into holes mortised into the side of the sash and then run over a pulley and tied to an iron weight which is hidden in a pocket inside the window jamb. These weights provide perfect balance and a smooth almost weightless operation to the window.
You can make these small repairs yourself. Professional glass services can help with glass replacement but still, you must know the basics of restoring old windows. Here are a few tips that will guide you:
At the start of the glass service, you will have to take out the wooden frame. Next, scrape the glazing around the sides of the glass; use proper tools for this job and carefully remove the glaze. Now you are in a position to remove the glass. Use the flat head of the screwdriver to wriggle the glass out of the frame, apply even pressure on both sides before carefully removing it.
Before you move on to glass replacement, there are other minor things to deal with first. Old windows had ropes that were used to open and close them. If the rope has perished and needs replacement then buy a new one. Insert it from both sides and nail it down, make sure that it is long enough and easy to pull. Do not paint the ropes, unpainted ropes can last a lifetime.
Now you can begin working on the glass replacement. Use a wire brush to clean the wood, thoroughly brush the edges and remove any loose debris. Use sandpaper to sand around the wooden frame to give it a smooth and gleaming look.
Professional glass services will tell you to be very careful when performing this final step. It is now time for the actual glass replacement to take place. Put on a bead of caulk where the glass will rest and insert the glass into the frame. Press down with firm hands to set it into place.
Apply the final touches by glazing the window. Cover the edges of the glass so that it attaches with the frame. With the completion of this step, your glass service comes to an end.
Glass service is a do it yourself task. With a bit of hard work and the right application, you will be able to achieve this in no time.
While some contractors may be fully conversant with common casement windows, sash windows are notoriously complex and require attention from properly trained professionals; otherwise, you may find your repaired GoowWindowWorks are draughty, misshapen and return to their poor condition in a short space of time.
This is the home improvement equivalent of welding or respraying an old car; there comes a point when making any further repairs is simply not cost effective - the only way answer is to buy a replacement. The problem with windows, however, is that, should they fall into disrepair severe enough then they may begin to expose your home to the elements and could represent a health hazard with regards to you and your family.